It is not allowed to replace 55w halogen lamp with 80W LED.
If the current exceeds the predetermined amount of the control circuit, it is easy to cause the circuit to burn out. You can install a relay and use the low beam circuit as the signal, but you cannot directly use the power supply for lighting.
The current of general household appliances is determined by the rated power. The formula is rated current=rated power ÷ working voltage. Due to the influence of external factors and operating conditions, the actual working current differs greatly from the rated current.
To sum up, it is not allowed to replace 55w halogen lamp with 80W LED.
Precautions for use of halogen lamp
Before installing the halogen lamp, we need to turn off all the power, and then use the plastic sleeve to protect the cleaning of the bulb glass shell. Do not touch it directly with your hands. If you touch it carelessly, please wipe it with alcohol.
When the halogen bulb lights up, the cold air shall not be blown directly to the bulb to avoid impact or vibration during the lighting process. In addition, after the halogen bulb lights up or just turns off, do not touch it with your hands to avoid scalding your hands.
Precautions for use of LED lights
LED lamps shall be stored in a dry and ventilated environment, with the storage temperature controlled at 23 ± 5 ℃ and the relative humidity controlled at 40% to 70%.
It is prohibited to use unknown chemical liquid to clean LED lamps, which may damage the surface of LED resin, or even cause resin cracks. If necessary, please immerse the LED in alcohol at room temperature for cleaning, and the time is within one minute.
Care LED lamps need special liquid to clean, do not misuse, which will cause great damage to the lamps.





