Dec 07, 2022 Leave a message

The LCD TV Light Bar Is Broken. Is It Necessary To Repair It

Whether the LCD TV light bar is damaged or not depends on whether the damage is serious or not and whether it affects normal viewing. If it is stopped for a long time and causes abnormal starting, it will recover by itself. If it is damaged in a small range, it does not affect the appearance, and it is unnecessary to repair it. If a large area of black screen affects viewing, you need to contact the maintenance personnel to repair it.

Causes of LCD TV Light Bar Damage and Solutions

It may be caused by the backlight circuit protection caused by the abnormal power supply of the backlight booster board.

It may be caused by the aging of LED LCD TV light strip.

It may also be caused by poor contact between the lamp socket of the backlight booster board and the lamp tube, high or low power supply of the backlight or aging of the backlight tube.

resolvent:

When the LCD screen is disassembled, the backlight+screen can be seen.

Carefully remove the LCD glass from the backlight and place it in a safe place.

Next, repair the backlight. When the backlight frame is disassembled, you can see the lamp tube or LED light strip. Remove the lamp tube or light strip and replace it according to the length. How the lamp tube was originally wired and how it was wired during repair can not be changed.

Maintenance method of LCD TV light strip

The LCD TV will accumulate heat inside the TV body when it works for a long time. Although this will not cause too much impact on other components of the LCD TV, it may burn the LCD TV panel, and then cause other components of the LCD TV to malfunction.

Under the influence of static electricity, the LCD TV screen is very easy to get dust. Many people use clean water to clean the LCD TV, but this cleaning method is actually wrong. It not only fails to achieve good cleaning effect, but also leaves water stains. Improper cleaning will also make the LCD TV damp, causing damage to the TV. In the cleaning process, if you accidentally infiltrate water droplets into the TV screen, you should wait for the water to evaporate before powering on.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry